|
|
|
|
|
|
Inno-Flex Spare Drive Belts
|
Our Price: $10.00
|
|
|
Inno-flex belts are a direct replacement for the belts that come with the RB Innovations nitro supercharger. Inno-flex belts are made of a high strength composite rubber which will endure high temperature, and extreme weather conditions while resisting wear.
* These belts come two per package.
|
|
|
|
|
|
|
|
|
|
|
|
|
Supercharger Idler Pulleys
|
|
Our Price: $22.00
|
|
|
Idler pulleys are standard for all superchargers. Spare idler pulleys are made from high-quality aluminum. Idler pulleys allow you to reconfigure the supercharger belt routing on custom applications. Each idler pulley includes:
Fully assembled idler pulley
Two high-speed bearings
Shaft and threaded fastener
* Except for the T-Maxx 2.5, all supercharger assemblies use an aluminum stand off.
|
|
|
|
|
|
|
|
|
|
|
|
|
Supercharger Overdrive Pulleys
|
|
Our Price: $12.00
|
|
|
Overdrive pulleys allow you to adjust the amount of boost your RB Innovations nitro supercharger produces. The stock pulley that comes with each supercharger provides a 30% overdrive. The 50% overdrive pulley will increase the speed at which the turbo impeller spins. When the speed of the turbo impeller is increased, the amount of boost produced by the supercharger is also increased.
The RB Innovation's 30% overdrive pulley is not available in plastic.
|
|
|
|
|
|
|
|
|
|
|
|
|
High Speed Ball Bearing
|
|
Our Price: $7.50
|
|
|
These high-speed bearings are designed as direct replacements for the stock bearings that are included with each RB Innovations nitro supercharger. Each bearing is built to endure high temperatures and extreme weather conditions while resisting wear.
|
|
|
|
|
|
|
|
|
|
|
|
|
180 Degree High Flow Manifold
|
|
Our Price: $28.49
|
|
|
This High Flow Intake Manifold will fit all super-charger systems and all chassis. This new design allows high velocity and smooth transitions from the air filter into the heart of the super-charger system. The manifold is o-ring sealed for maximum sealing properties. The most common application is for easily routing intake from the front of the truck into the super-charger system. This is a low profile manifold which will not interfere with the fuel cell or any other chassis component. This can be installed as show in below pictures.
|
|
|
|
|
|
|
|
|
|
|
|
|
6-32 Supercharger Pressure Fitting
|
|
Our Price: $3.00
|
|
|
This 6-32 fitting screws directly into the body of the RB Innovations supercharger. By using this fitting you can use pressure from the supercharger to pressurize your vehicle's fuel cell. This provides more consistent fuel delivery to the engine. Thus increasing the overall performance of the engine.
|
|
|
|
|
|
|
|
|
|
|
|
|
Auxiliary Pressure System
|
|
Our Price: $8.00
|
|
|
The auxiliary pressure system consists of a 6/32 pressure fitting and a "Y" connector. By using the auxiliary pressure system you can use pressure from the supercharger and exhaust to pressurize your vehicle's fuel cell. This provides more consistent fuel delivery to the engine. Thus increasing the overall performance of the engine.
|
|
|
|
|
|
|
|
|
|
|
|
|
Belt Deflector Plate
|
|
Our Price: $12.00
|
|
|
Belt defector plates are made from high-strength aluminum or black composite plastic to endure harsh conditions.
|
|
|
|
|
|
|
|
|
|
|
|
|
HPI/Duratrax Supercharger Mounting Bracket
|
|
Our Price: $24.99
|
|
|
This is a replacement supercharger mounting bracket. Made of high quality 5052 aluminum, this mounting bracket is able to withstand the abuse of nitro powered RC cars and trucks.
This mounting bracket is designed to work with the following vehicles:
DTX Streetforce
Nitro MT
RS4-3
RS4-1/2
HPI MT-2
|
|
|
|
|
|
|
|
|
|
|
|
|
1/8th Scale Intake Adapter
|
|
Our Price: $12.50
|
|
|
This intake adapter allows the RB Innovations nitro supercharger to be easily used with 1/8 scale sized carburetors. The adapter is made of very durable high density plastic, and the connecting tube is made of flexible high temperature rubber. Each kit contains an adapter and connecting tube.
|
|
|
|
|
|
|
